PTC Creo 1.0 & 2.0 Mxxx patcher Win32&64 通用补丁包 By SSQ（许可证）

野火 · 发表于 2012-6-10 16:54

PTC Creo 1.0 (2.0) Mxxx 32/64bit patcher (by SSQ)
1.  Open ptc_licfile.dat with any txt-editor and replace every occurrence of 00-00-00-00-00-00 with you network
card MAC-address (shown in the bottom left corner of the Creo setup)
2.  Install Creo 1.0 (2.0) Mxxx 32/64bit (Parametric, Direct, Simulate, Distributed Services Manager) using
ptc_licfile.dat as node-locked license (no Server running)
3.  Run PTC_Creo_Patcher_SSQ.exe
ATTENTION!  On Vista/Win7 you mast run it as Administrator! (right mouse click > run as Administrator)
4.  Click Look For..
5.  For Creo Parametric, Direct or Simulate browse to <Creo 1.0 (2.0) Mxxx root directory>
(by default C:\Program Files\PTC\Creo 1.0(2.0)\Common Files\Mxxx\) and click Look For..
6.  Be sure that you’ve got a right path in Program Directory tab Click Start
7.  Wait for window All files seem to be patched. Enjoy! Click OK
8.  For Creo  Distributed Services Manager browse to <Creo 1.0 (2.0) Distributed Services Manager root directory>
(by default C:\Program Files\PTC\Creo 1.0(2.0)\Creo Distributed Services Manager \) and click Look For..
9.  Be sure that you’ve got a right path in Program Directory tab Click Start
10. Wait for window All files seem to be patched. Enjoy! Click OK
That’s all… Enjoy!
Team-SolidSQUAD (SSQ)

wzh156016521 · 发表于 2012-6-10 17:56

感谢分享

hbabc · 发表于 2012-6-10 23:07

谢谢

xinglaibao · 发表于 2012-6-11 16:00

感谢

kaichen@010 · 发表于 2012-6-15 10:19

怎么破解呀？

kangkang777 · 发表于 2012-6-18 14:15

谢谢分享~

gaoshengli · 发表于 2012-6-18 14:18

感谢分享，好期待下载中的Creo 2.0 m010

heorpost · 发表于 2012-6-18 14:58

谢谢分享......

segoly · 发表于 2012-6-18 15:11

牛人顶起

mcuikai · 发表于 2012-6-18 15:36

感谢分享

		自动登录	找回密码
密码			立即注册

[下载] PTC Creo 1.0 & 2.0 Mxxx patcher Win32&64 通用补丁包 By SSQ（许可证）

本帖被以下淘专辑推荐:

社区建设勋章

优秀斑竹勋章

原创先锋勋章

热心助人勋章

宣传大使勋章

斑竹勋章