Pro/Engineer Wildfire 5.0 M010,M020,M030,M040,M060【32位&64 位】补丁包by ZWT

野火

1) Start pro/e setup

2) Open license.dat with any  txt-editor and replace every occurance of 00-00-00-00-00-00 with your computer real HOST_D (same one shown in the bottom left corner of the Pro/e setup). Save the license.dat

3) Install proe - proe_mech -ptc_distributed_services (optional). On license-config screen select "nodelocked license" and point to edited license.dat

Next  apply a patches (if u didn't install the complete package, you will get "File not found" errors, accept or bleed)

for pro/engineer:
Copy "proe_WF5_Win64_crk.exe" to folder <proeWildfire 5.0 progdir>\x86e_win64\obj and click "Next > OK > Next > OK > Next > OK > Next > OK > Finish > OK"

for pro/mechanica
Copy "proe_mech_WF5_Win64_#1_crk.exe" to folder <proeWildfire 5.0 progdir>\x86e_win64\obj and click "Next > OK > Next > OK > Next > OK > Next > OK > Finish > OK"
Copy "proe_mech_WF5_Win64_#2_crk.exe" to folder <proe mech WF5 progdir>\x86e_win64\ptc and click "Start > OK"

for ptc distributed services
Copy "ptc_distributed_services_WF5_Win64_crk.exe" to folder <ptc_distributed_services WF5 Win64 progdir>\x86e_win64\obj and click "Next > OK > Finish > OK"

That's all.. Enjoy

游客，如果您要查看本帖隐藏内容请回复

wsfsy168

楼主辛苦了！ 做个沙发

cexogdeeq

谢谢分享

史伟森

谢谢分享

wangce848

占位了jpkj9-8-曙

GTOFK

非常感激!

wphldk

不错啊

han418

谢谢楼主

nanguaxia

还在下5.0的，先看一下