Pro/Engineer Wildfire 4.0 M020/M030 补丁包 by ZWT

野火

注意：
1、如果你只是学习 PROE 看红色的部分就可以了
2、如果你还需要 mechanic 那还要看蓝色的部分
其他的不用看。——野火
===================================
1> open license.dat then displace all string"00-00-00-00-00-00" with your PTC_HOST_ID(Your netcard physical address) then save.

2> Install your pro/E &Pro/M wildfire4.0 M020 with above modified lic file.Node Locked lic method. No lic server installaion needed.

2.Run patchs!

Put proe-patch.exe under directory :
<Installed location>\proeWildfire 4.0\i486_nt\obj       then apply it.
Put prom-patch1.exe under directory :
<Installed location>\proeWildfire 4.0\mech\i486_nt\bin      then apply it.

Put prom-patch2.exe under directory :
<Installed location>\proeWildfire 4.0\mech\i486_nt\ptc      then apply it.

3.If you want install PTC Distributed Services,access PTC.Setup: other product->PTC Distributed Services, use the modified license.dat at step one with node locked lic method. then

Put prods-patch.exe under directory :
<Installed location>\ptc_distributed_services\     then apply it.
---------------------------------------
P.S. Regarding embedded Vericut:

Actually, CGtech no longer supports its VERICUT as an embedded software for pro/e and no longer uses PTC lic.FYI, See the CGtech official website said:   http://www.cgtech.com/ptc_update/index.htm  hence don't offer patch for it.

That's all.Enjoy it!

Team ZWT 2008

liuzhenghai

还没用上，不过先学习一下了！ 感谢版主提供了

zhangyanbo77

谢谢版主~~
版主就是先人一步~

xiechao

谢谢了
终于找到破解文件了

虎子

Pro/Engineer Wildfire 4.0 M030 补丁包的帮助是英文，本人外文不好，在同事的帮忙下，还是装上了，谢谢了

37222897

太感谢了

xiaozu

下了还没装，感谢

jackey_zhou

多谢楼主分享!
下来试试看

sltorum

谢谢了！！！

ccc_nix

總麼這麼快就有出來的啦，呵呵，咸謝提供