懂英文的入---安装步骤

poloe · 发表于 2008-11-3 21:11

PTC Pro/ENGINEER Wildfire 4.0 F000
===================================
1> open license.dat then displace all string"00-00-00-00-00-00" with your PTC_HOST_ID(Your netcard physical address) then save.

2> Install your pro/E &Pro/M wildfire4.0 F000 with above modified lic file.Node Locked lic method. No lic server installaion needed.

2.Run patchs!

Put proe-patch.exe under directory :
<Installed location>\proeWildfire 4.0\i486_nt\obj    then apply it.

Put prom-patch1.exe under directory :
<Installed location>\proeWildfire 4.0\mech\i486_nt\bin    then apply it.

Put prom-patch2.exe under directory :
<Installed location>\proeWildfire 4.0\mech\i486_nt\ptc    then apply it.

3.If you want install PTC Distributed Services,access PTC.Setup: other product->PTC Distributed Services, use the modified license.dat at step one with node locked lic method. then

Put prods-patch.exe under directory :
<Installed location>\ptc_distributed_services\    then apply it.
---------------------------------------
P.S. Regarding embedded Vericut:

Actually, CGtech no longer supports its VERICUT as an embedded software for pro/e and no longer uses PTC lic.FYI, See the CGtech official website said: http://www.cgtech.com/ptc_update/index.htm  hence don't offer patch for it.

That's all.Enjoy it!

Team ZWT 2008