符合中国标准的工程图配置文件

tianya1988218

基本符合国家标准的工程图配置文件，可以下载的！
将此配置文件保存到安装目录text文件夹如D:\proe3.0\text，每次使用调用即可。
解压缩后为一个.dtl文件，其内容如下所示：

drawing_text_height 3.000000
text_thickness 0.000000
text_width_factor 0.800000
broken_view_offset 5.000000
create_area_unfold_segmented YES
def_view_text_height 5.000000
def_view_text_thickness 0.000000
detail_circle_line_style SOLIDFONT
detail_circle_note_text DEFAULT
detail_view_circle ON
half_view_line SYMMETRY_ISO
model_display_for_new_views NO_HIDDEN
projection_type FIRST_ANGLE
show_total_unfold_seam YES
tan_edge_display_for_new_views DEFAULT
view_note STD_ANSI
view_scale_denominator 10
view_scale_format RATIO_COLON
detail_view_boundary_type CIRCLE
detail_view_scale_factor 2.000000
crossec_arrow_length 5.000000
crossec_arrow_style TAIL_ONLINE
crossec_arrow_width 2.000000
crossec_text_place AFTER_HEAD
crossec_type OLD_STYLE
cutting_line STD_ANSI
cutting_line_adapt NO
cutting_line_segment 0.000000
def_xhatch_break_around_text NO
def_xhatch_break_margin_size 0.150000
draw_cosms_in_area_xsec NO
remove_cosms_from_xsecs TOTAL
show_quilts_in_total_xsecs NO
datum_point_shape CROSS
datum_point_size 1.000000
hidden_tangent_edges ERASED
hlr_for_datum_curves YES
hlr_for_pipe_solid_cl NO
hlr_for_threads YES
location_radius DEFAULT(2.)
mesh_surface_lines ON
pipe_insulation_solid_xsec NO
ref_des_display NO
show_sym_of_suppressed_weld NO
thread_standard STD_ISO
weld_light_xsec NO
weld_solid_xsec NO
allow_3d_dimensions YES
angdim_text_orientation PARALLEL_ABOVE
associative_dimensioning YES
blank_zero_tolerance NO
chamfer_45deg_leader_style STD_ASME_ANSI
chamfer_45deg_dim_text JIS
clip_diam_dimensions YES
clip_dimensions YES
clip_dim_arrow_style ARROWHEAD
default_dim_elbows YES
dim_fraction_format DEFAULT
dim_leader_length 5.000000
dim_text_gap 0.500000
display_tol_by_1000 NO
draft_scale 1.000000
draw_ang_units ANG_DEG
draw_ang_unit_trail_zeros YES
dual_digits_diff -1
dual_dimensioning NO
dual_dimension_brackets YES
dual_metric_dim_show_fractions NO
dual_secondary_units MM
iso_ordinate_delta NO
lead_trail_zeros STD_DEFAULT
lead_trail_zeros_scope ALL
orddim_text_orientation PARALLEL
ord_dim_standard STD_ANSI
parallel_dim_placement ABOVE
radial_dimension_display STD_ASME
shrinkage_value_display PERCENT_SHRINK
symmetric_tol_display_standard STD_ASME
text_orientation PARALLEL_DIAM_HORIZ
tol_display NO
tol_text_height_factor STANDARD
tol_text_width_factor STANDARD
use_major_units NO
witness_line_delta 2.000000
witness_line_offset 0.500000
default_font simfang     WARNING: Font NOT found!
dim_dot_box_style DEFAULT
draw_arrow_length 3.000000
draw_arrow_style FILLED
draw_arrow_width 1.000000
draw_attach_sym_height DEFAULT
draw_attach_sym_width DEFAULT
draw_dot_diameter DEFAULT
leader_elbow_length 6.000000
leader_extension_font SOLIDFONT
axis_interior_clipping NO
axis_line_offset 3.000000
circle_axis_offset 3.000000
radial_pattern_axis_circle YES
asme_dtm_on_dia_dim_gtol ON_GTOL
gtol_datums STD_JIS
gtol_datum_placement_default ON_BOTTOM
gtol_dim_placement ON_BOTTOM
new_iso_set_datums YES
stacked_gtol_align NO
2d_region_columns_fit_text YES
all_holes_in_hole_table NO
dash_supp_dims_in_region YES
def_bom_balloons_attachment EDGE
def_bom_balloons_snap_lines NO
def_bom_balloons_stagger NO
def_bom_balloons_stagger_value 0.600000
def_bom_balloons_view_offset 0.800000
def_bom_balloons_edge_att_sym ARROWHEAD
def_bom_balloons_surf_att_sym INTEGRAL
min_dist_between_bom_balloons 0.800000
model_digits_in_region YES
reference_bom_balloon_text "DEFAULT"
show_cbl_term_in_region YES
sort_method_in_region DELIMITED
zero_quantity_cell_format EMPTY
draw_layer_overrides_model NO
ignore_model_layer_status YES
model_grid_balloon_display YES
model_grid_balloon_size 4.000000
model_grid_neg_prefix -
model_grid_num_dig_display 0
model_grid_offset DEFAULT
model_grid_text_orientation HORIZONTAL
model_grid_text_position CENTERED
pipe_pt_line_style DEFAULT
pipe_pt_shape CROSS
pipe_pt_size DEFAULT
show_pipe_theor_cl_pts BEND_CL
decimal_marker COMMA_FOR_METRIC_DUAL
default_pipe_bend_note NO
drawing_units MM
harn_tang_line_display NO
line_style_standard STD_ANSI
max_balloon_radius 3.000000
min_balloon_radius 2.000000
node_radius DEFAULT
pos_loc_format %s%x%y, %r
sym_flip_rotated_text NO
weld_symbol_standard STD_ANSI
yes_no_parameter_display TRUE_FALSE

yun0336wu

我的文档数据与您的略有出入，请参考：
　　　　PRO/E工程图配置文件
　　说起来，很多人不习惯设置PRO/E工程图配置文件，总觉得在PRO/E中出工程图非常别扭，图面也不好整理等等的原因，常常是将Pro/E的工程图 转到CAD里面再标注，浪费时间。
　　如果产品尺寸有改动，就又要转一次，又重新标注尺寸等等。
　　其实在PRO/E中出工程图，高效、快速，由于PRO/E的文件关联性，产品只要有改到，工程图也就相应的更改，非常方便。

　　将配置文件里的内容按一下重新设置即可：

drawing_text_height 3
text_thickness 0.1
text_width_factor 0.800000
broken_view_offset 1.000000
create_area_unfold_segmented YES
def_view_text_height 3
def_view_text_thickness 0.1
detail_circle_line_style SOLIDFONT
detail_circle_note_text DEFAULT
detail_view_circle ON
half_view_line SOLID
model_display_for_new_views no_hidden
projection_type first_angle
show_total_unfold_seam YES
tan_edge_display_for_new_views DEFAULT
view_note STD_ISO
view_scale_denominator 0
view_scale_format ratio_colon
detail_view_boundary_type CIRCLE
detail_view_scale_factor 2.000000
crossec_arrow_length 5
crossec_arrow_style TAIL_ONLINE
crossec_arrow_width 2.0
crossec_text_place AFTER_HEAD
crossec_type OLD_STYLE
cutting_line std_iso
cutting_line_adapt NO
cutting_line_segment 0.000000
def_xhatch_break_around_text NO
def_xhatch_break_margin_size 0.150000
draw_cosms_in_area_xsec NO
remove_cosms_from_xsecs TOTAL
show_quilts_in_total_xsecs NO
datum_point_shape CROSS
datum_point_size 8
hidden_tangent_edges DEFAULT
hlr_for_datum_curves YES
hlr_for_pipe_solid_cl NO
hlr_for_threads YES
location_radius DEFAULT(2.)
mesh_surface_lines ON
ref_des_display NO
show_sym_of_suppressed_weld NO
thread_standard std_iso
weld_light_xsec NO
weld_solid_xsec NO
allow_3d_dimensions yes
angdim_text_orientation parallel_outside
associative_dimensioning YES
blank_zero_tolerance NO
chamfer_45deg_leader_style std_iso
chamfer_45deg_dim_text JIS
clip_diam_dimensions YES
clip_dimensions YES
clip_dim_arrow_style DOUBLE_ARROW
default_dim_elbows YES
dim_fraction_format DEFAULT
dim_leader_length 5
dim_text_gap 0.5
display_tol_by_1000 NO
draft_scale 1.000000
draw_ang_units ANG_DEG
draw_ang_unit_trail_zeros no
dual_digits_diff -1
dual_dimensioning NO
dual_dimension_brackets YES
dual_metric_dim_show_fractions NO
dual_secondary_units MM
iso_ordinate_delta yes
lead_trail_zeros STD_DEFAULT
lead_trail_zeros_scope DIMS
orddim_text_orientation horizontal
ord_dim_standard STD_ANSI
parallel_dim_placement ABOVE
radial_dimension_display STD_ASME
shrinkage_value_display percent_shrink
symmetric_tol_display_standard STD_ASME
text_orientation parallel_diam_horiz
tol_display NO
tol_text_height_factor 0.4
tol_text_width_factor STANDARD
use_major_units yes
witness_line_delta 1
witness_line_offset 0.5
default_font font
dim_dot_box_style DEFAULT
draw_arrow_length 3
draw_arrow_style filled
draw_arrow_width 1.5
draw_attach_sym_height DEFAULT
draw_attach_sym_width DEFAULT
draw_dot_diameter DEFAULT
leader_elbow_length 5
leader_extension_font SOLIDFONT
axis_interior_clipping yes
axis_line_offset 3
circle_axis_offset 3
radial_pattern_axis_circle yes
asme_dtm_on_dia_dim_gtol ON_GTOL
gtol_datums std_iso
gtol_datum_placement_default ON_BOTTOM
gtol_dim_placement ON_BOTTOM
gtol_symbols_same_size NO
new_iso_set_datums YES
stacked_gtol_align NO
2d_region_columns_fit_text NO
all_holes_in_hole_table YES
dash_supp_dims_in_region YES
def_bom_balloons_attachment EDGE
def_bom_balloons_snap_lines NO
def_bom_balloons_stagger NO
def_bom_balloons_stagger_value 0.600000
def_bom_balloons_view_offset 0.800000
def_bom_balloons_edge_att_sym ARROWHEAD
def_bom_balloons_surf_att_sym INTEGRAL
min_dist_between_bom_balloons 0.800000
model_digits_in_region no
reference_bom_balloon_text "DEFAULT"
show_cbl_term_in_region YES
sort_method_in_region DELIMITED
zero_quantity_cell_format EMPTY
draw_layer_overrides_model NO
ignore_model_layer_status YES
model_grid_balloon_display YES
model_grid_balloon_size 4.0
model_grid_neg_prefix -
model_grid_num_dig_display 0
model_grid_offset DEFAULT
model_grid_text_orientation HORIZONTAL
model_grid_text_position CENTERED
pipe_pt_line_style DEFAULT
pipe_pt_shape CROSS
pipe_pt_size DEFAULT
show_pipe_theor_cl_pts BEND_CL
decimal_marker COMMA_FOR_METRIC_DUAL
default_pipe_bend_note NO
drawing_units mm
harn_tang_line_display NO
line_style_standard std_ansi
max_balloon_radius 0
min_balloon_radius 0
node_radius DEFAULT
pos_loc_format %s%x%y, %r
sym_flip_rotated_text NO
weld_symbol_standard std_iso
yes_no_parameter_display TRUE_FALSE

设置完后注意保存，以后使用直接调用此工程图配置文件。

wsfsy168

支持楼主啊！！顶上去

野火

感谢两位朋友分享

31358302

line_style_standard std_iso

tianya1988218

请您参考http://www.proewildfire.cn/thread-8529-1-1.html
line_style_standard std_iso打印文字将变粗。

[ 本帖最后由 tianya1988218 于 2009-7-23 09:22 编辑 ]

ph1011

谢谢楼主

ph1011

两个选择，也不知道到底哪个标准了...

zou8xy

多谢大侠。

让我解决了大难题。

在Pro/E工程图尺寸标注中的默认字体是“Font”,但我老大说这个不好看要改成“Txt”或者是“FandSond-GB2312”。我现在是标好尺寸后，通过尺寸属性一个尺寸一个尺寸的个改。请问个位大侠我想把尺寸标注中的默认字体改为“Txt”或者是“FandSond-GB2312”怎样做？

xzy-crystal

顶啊,good