proe 野火3.0 M080 注册机下载和安装破解说明

野火 · 发表于 2007-10-8 20:39

.boot up your pc with windows
.start pro/e setup
.open ptc_licfile.dat with your fav txt-editor
.replace every occurance of <HOSTID> with the one shown in the bottom left corner of the Pro/e setup
(its your mac-id, format: xx-xx-xx-xx-xx)
.install pro/e - pro/m - pro/ds, i dont care which one or in which order
.on license-config screen select "nodelocked license" and point to edited ptc_licfile.dat
.blalala install

next for pro/engineer:
(if u didnt install the complete package, u get "missing file" errors, accept or bleed)
.run ptc.pro engineer.wildfire.3.0.generic-patch.exe, point to <installdir>\i486_nt\obj folder
.edit <pro/e installdir>\bin\proev.bat
  change "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%" in
      "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0"
(add PTC_KEY=0)

pro/mechanica:
.run ptc.distributed.services.generic-patch.exe
.point to <pro/m installdir>\i486_nt\bin
   <pro/m installdir>\i486_nt\obj
   <pro/m installdir>\i486_nt\ptc
(in this order, after every "missing file" error)

pro/distributed services:
.run ptc.distributed.services.generic-patch.exe and point to <pro/ds installdir>\i486_nt\obj

zhenq · 发表于 2007-10-19 14:28

能不能有祥细安装说明,贴上图片就更好,谢谢

野火 · 发表于 2007-10-19 16:33

回楼上，可以参考相近版本的图片教程，论坛都有，安装过程多是相同的

wangyongmin7 · 发表于 2007-10-28 05:43

是呀给电图片
谢谢

jamn · 发表于 2007-10-29 10:38

96hao · 发表于 2007-11-9 20:53

怎的全是英文呀

jxc · 发表于 2007-12-2 20:26

alpha · 发表于 2007-12-4 23:05

謝謝了，我在網上找了很久了。
沒想到，遠在天邊，近在眼前

tange201314 · 发表于 2007-12-26 13:09

到底怎样才能下载到东东啊

无止境 · 发表于 2008-1-9 19:50

谢谢，是否有汉化的说明啊

		自动登录	找回密码
密码			立即注册

[分享] proe 野火3.0 M080 注册机下载和安装破解说明

大家好

回复楼主的帖子

社区建设勋章

优秀斑竹勋章

原创先锋勋章

热心助人勋章

宣传大使勋章

斑竹勋章