有限元输出错误

kz1

有限元输出错误，破衣2.0和ansys10
前处理（选择ANSYS求解器），出现如下提示，

6% of elements had distortion index less than 0.4000

6% of mid-side nodes had mid ratio more than 0.1000

Rotational constraints have been ignored in solid mesh output.

The mesh has been exported to file connecting_rod.ans.

FEM mesh for model CONNECTING_ROD has been stored successfully.

怎么解决，请叫一下，先谢了

easylife0224

没用过proe2.0和ansys的接口，但从提示可以看到在fem模式下，你的网格剖分质量很差，导致形成ans文件有问题。
解决的办法只能是通过网格控制，提高网格质量，没其他的办法。

还有，如果可以，建议尝试一下proe4.0的集成环境下的结构分析，很简单易学易用。

kz1

问题还没解决，请大虾出手